- General Information
 - Manufacturer
 - Eaton Corporation
 
- Manufacturer Website Address
 - http://www.eaton.com
 
- Brand Name
 - Tripp Lite series
 
- Product Line
 - SmartPro
 
- Product Type
 - Line-interactive UPS
 
Protects Mission-Critical Rack-Mounted Equipment
- Provides fully regulated sine wave AC output for servers, network storage devices and telecom hardware
 - Audible alarm signals loss of utility power, overload and low battery
 - 6 NEMA 5-15R outlets
 - 10 t. (3.1 m) power cord with 120V NEMA 5-15P input
 - 450-joule surge suppression rating
 
- Supports half load up to 14 min. and full load up to 4 min.
 - Internal batteries designed for hot-swap field replacement
 
- 2 load banks, each with one outlet individually controllable via software interface to reboot equipment or shed nonessential loads
 
- Maintains 120V nominal output over input range of 83V-147V without using battery power
 
- Removes electromagnetic and radio frequency interference that can disrupt or damage equipment's performance
 
- 99% line mode efficiency saves money, energy and protects the environment
 
- Compatible with Tripp Lite UPS management card options TLNETCARD, WEBCARDLX and SNMPWEBCARD
 
- USB and DB9 ports combine with PowerAlert software (available via free download from www.tripplite.com/poweralert) to monitor operating conditions, monitor AC power, and enable safe unattended system shutdown and file saves in case of a prolonged power failure
 - EPO port supports emergency shutdown in large facilities
 
- Hardware included for mounting in 1U of EIA-standard 19 in. 2- or 4-post rack
 - Optional 4POSTRAILKIT1U accessory available for extra support in 4-post installations
 - Compatible with vertical mount cabinets
 
- Warranty
 - Limited Warranty
 - 2 Year
 
- Technical Information
 - Plug/Connector Type
 - NEMA 5-15P
 
- Receptacle Type
 - NEMA 5-15R
 
- Receptacle Detail
 - 6 x NEMA 5-15R
 
- Transfer Time
 - 5 ms
 
- Application/Usage
 - Data Center
 
- VoIP Phone System
 
- Computer
 
- Power Description
 - Load Capacity (VA)
 - 1000 VA
 
- Load Capacity (Watt)
 - 800 W
 
- Input Voltage
 - 120 V AC
 
- Output Voltage
 - 120 V AC
 
- 115 V AC
 
- Waveform Type
 - Pure Sinusoidal
 
- Battery Information
 - Backup/Run Time (Full Load)
 - 4 Minute
 
- Typical Battery Recharge Time
 - 4.50 Hour
 
- Hot Swappable
 - Yes
 
- Physical Characteristics
 - Height
 - 1.7"
 
- Width
 - 17.5"
 
- Depth
 - 16.7"
 
- Rack Height
 - 1U
 
- Form Factor
 - Rack-mountable
 
- Weight (Approximate)
 - 31.99 lb
 
- Miscellaneous
 - Package Contents
 - SmartPro 1000RM1U UPS
 - SMART 1000RM1U UPS System
 - Mounting hardware
 - Cabling for USB & DB9 monitoring and EPO switching
 - PowerAlert unattended shutdown and UPS/Power monitoring software
 - Warranty information and instruction manual
 
- Country of Origin
 - Taiwan
 
- Environmental Compliance
 - Restriction of Hazardous Substances (RoHS)