Features | Flexible Power Protection for Smart Industrial Applications
The DIN24240DC standby UPS system with hardwire DC input/output delivers reliable power and battery backup for computing, networking, control and storage equipment in factories, warehouses, edge computing locations and automated manufacturing and fabrication facilities. The rugged compact housing withstands demanding conditions and integrates seamlessly and securely into electrical enclosures in any non-traditional IT environment.
Ideal for Factory Floors and Extreme Temperatures
Get full use of the DIN24240DC's power capacity because there is no derating based on its operating temperature range of -15°C (5°F) to 50°C (122°F), which expands the number of locations in which it can be used. Built to fit into small spaces, the DIN24240DC is a UL 508 recognized component for use in industrial panels. Its pre-installed clamp enables quick mounting to a 35 mm DIN rail. Its fanless design reduces noise and increases reliability.
Reliable Battery Backup Keeps You Operational Through Power Outages
Power outages not only drain productivity from the factory floor, but they also damage expensive equipment. The DIN24240DC protects productivity by providing enough runtime to maintain operation during a brief power outage and protects equipment by allowing it to complete an operation during an extended outage. It also prevents brownouts, overvoltages, surges and line noise from damaging equipment that could destroy data and contribute to costly downtime.
Stay in Control of Your Operation
LEDs on the front panel confirm normal operation and indicate alarm or fault status. Remote on/off can help you avoid maintenance surprises. The DIN24240DC has dry contacts for battery status and UPS communication.
Easy Preventative Maintenance and Initial Troubleshooting
The DIN24240DC requires connection of the BPDIN24XL external battery module (sold separately). Up to four battery modules can be connected to extend backup runtime. The self-test capability can extend the life of the UPS and minimize disruption to operations.
- General Information
- Manufacturer
- Tripp Lite by Eaton
- Manufacturer Website Address
- https://tripplite.eaton.com/
- Brand Name
- Tripp Lite by Eaton
- Product Type
- Standby UPS
- Warranty
- Limited Warranty
- 2 Year
- Technical Information
- Plug/Connector Type
- Hardwired
- Receptacle Type
- Hardwired
- Receptacle Detail
- 1 x Hardwired
- Phase
- Single Phase
- Application/Usage
- Industrial
- Factory
- Edge Computing
- Manufacturing Facility
- IT Equipment
- Machine Control
- Power Description
- Load Capacity (VA)
- 240 VA
- Load Capacity (Watt)
- 240 W
- Input Voltage
- 24 V DC
- Output Voltage
- 24 V DC
- Output Power Factor
- 1
- Display & Graphics
- Display
- LED
- Controls/Indicators
- Status Indicators
LED Indicators:
- Power (Green)- Line Mode ON (Solid)
- Battery Mode (Flashing) Fault (Red) - Flashing
- Interfaces/Ports
- EPO Port
- Yes
- Battery Information
- DC System Voltage
- 24 V DC
- Battery Characteristics
- Valve-regulated
- Battery Chemistry
- Lead Acid
- Backup/Run Time (Full Load)
- 10 Minute
- Backup/Run Time (Half Load)
- 20 Minute
- Environmental Conditions
- Maximum Operating Temperature
- 122°F (50°C)
- Storage Temperature
- 5°F (-15°C) - 104°F (40°C)
- Maximum Operating Elevation
- 9842.52 ft
- Sound Emission (A-Weighted)
- 40 dB(A)
- Physical Characteristics
- Height
- 4.9"
- Width
- 1.6"
- Depth
- 5.1"
- Form Factor
- DIN Rail
- Miscellaneous
- Package Contents
- 240VA DIN Rail UPS
- Safety Card
- Owner's Manual
- Environmentally Friendly
- Yes
- Environmental Compliance
- Restriction of Hazardous Substances (RoHS)
- Restriction of Hazardous Substances (RoHS) 3
- Registration, Evaluation, Authorization and Restriction of Chemicals (REACH)
- Waste Electrical and Electronic Equipment Directive (WEEE)
